Friday, October 1, 2010

Charm Swap VI!


The charms for the EtsyMetal team's 6th charms swap (CS6) are finished. I waited until the last minute as usual. So here is the process for making 22 charms. A small production line. It started with a butterfly sketch I swiped from my good friend and artist, Michelle Byran. Butterflies are everywhere in jewelry, but I was attracted to the great feeling of flight and movement in the tiny sketch on a post it note. I made a prototype to see if it would work in metal. Michelle will be getting a charm. Maybe she'll give me some more sketches :)

I shrunk the image down and traced it. Then adhered the tracings to sheet copper.
Cut out all the little butterfly shapes.
Cut sterling silver half bead wire for the bodies and balled up the ends of silver wire for the antennas. Then the pieces were soldered together and I put a bend in the butterfly bodies to give them more dimension.
All that was left to do was add a patina, tumble, and seal with a little bit of wax.
All done! I am the partner of the curator, Inbar Baraket for this charm swap and have been receiving all the charms over the past couple of weeks. There are still several to come in, but it promises to be a fantastic bracelet. Everyone has done lovely work.

3 comments:

  1. You should make charms like this part of your regular line. These are SOOO cute!

    ReplyDelete
  2. I think the butterflies are too cute...chars are always nice hanging from bracelets or anywhere else for that matter.

    ReplyDelete